JACKET REV'IT! COMPONENT 3 H2O
Key features
- Use Adventure
- Protectors Level 1 on shoulders and elbows
- Waterproof Yes, with membrane
FREE delivery in 1–2 weeks. Details
Shipped directly by the supplier
Description
An evolution of a modern DIRT Series classic, the Component 3 H2O builds on the well-received design approach of the adventure jacket, which focused on technical features, further refining the details that set it apart and adding new ones.
Form and function in tune with fashion
Inspired by designs used across the outdoor segment, it focuses strongly on form and function, both in tune with the latest fashion trends. We are not saying it is a compromise, quite the opposite. Strategically combined, abrasion-resistant Cordura® ripstop and PWR|Shell stretch materials give the Component 3 H2O a rugged, durable look along with its distinctive lightness and unmistakable functionality. With 100% wind- and waterproof hydratex 3L lamination, taped seams, SEESMART CE Level 1 armour and an extra dedicated pocket to upgrade with a SEESOFT CE Level 2 back protector, the Component 3 H2O certainly ticks every box.
Small changes. Big difference.
We know the smallest changes can make a big difference. That is why we changed the pocket layout. Angled towards the body, the pocket contents are easier to reach with or without gloves. We also added a CFZ VCS|Aquadefence vent zip (CFZ stands for central front zip) that allows more direct airflow to the body when you need it most. The detachable hood has also been reshaped for a closer fit, wrapping around the rider’s head rather than sitting on top. The sporty look adds a casual touch to the outdoor lifestyle, while the fit is designed mainly to slide over our Proteus protector jacket when you are about to start a new adventure. Thanks to the unisex fit and updated grading, the Component 3 H2O is now available to both men and women, making it easier to fit different sizes, especially the smaller ones.
Note: We recommend women order one size smaller than they usually buy.
Features
- Arm zips
- hydratex|3L — A 3-layer construction; the hydratex|3L membrane has a protective tricot layer laminated to the back of the membrane. The result is a waterproof, breathable membrane that is also very durable.
- Prepared for SEESOFT CE Level 2 back protector insert — The back protector pocket in this REV’IT! garment is tailored to take the SEESOFT CE Level 2 Type RV back protector, an easy upgrade to maximise safety.
- Upper back zip
- SEESMART CE Level 1 elbow protectors
- SEESMART CE Level 1 shoulder protectors — SEESMART shoulder protectors offer the highest level of flexibility while passing EN 1621-1:2012 CE Level 1 impact tests, both in normal and hot (T+) conditions
- Laminated reflectives on the back — The reflective areas ensure excellent visibility from all angles, so the wearer can be seen from every direction. For a more refined look, the reflective areas are welded onto the fabric.
- Reflective laminated rear logo — This product features laminated reflectives on the back of the garment so you can be seen in low light, bad weather and at night.
- YKK AQUASEAL® front zip
- Cuff adjustment tabs
- Comfort collar — The comfort collar is added to garments for extra comfort in crucial places. An additional soft fabric is used for a comfortable touch.
- Detachable hood — The hood can be easily removed from the jacket thanks to a zip.
- Laminated reflectives on the hood — The reflective areas ensure excellent visibility from all angles, so the wearer can be seen from every direction. For a more refined look, the reflective areas are welded onto the fabric. This welding process eliminates stitch holes, keeping the garment safer.
- Hood drawcord
- Active fit — The active fit is designed to give full freedom of movement, minimising excess material that could restrict mobility. It is strategically tailored to fit the body where needed, while allowing free movement during physical activity.
- Hem drawcord
- Laminated reflectives on the collar — The reflective areas ensure excellent visibility from all angles, so the wearer can be seen from every direction. For a more refined look, the reflective areas are welded onto the fabric. This welding process eliminates stitch holes, keeping the garment safer.
- Rear slit pocket — A slit pocket on the lower back lets you stow personal items easily without getting in the rider’s way.
- Neoprene — Neoprene is a synthetic rubber well suited to protective products. It is resistant to abrasion and chemicals, waterproof and moderately stretchy.
- 3L CORDURA® 750D ripstop — Three-layer CORDURA® with ripstop properties.
- PWR|Shell ripstop stretch — Durability and high abrasion resistance are the defining features of PWR|Shell, thanks to its special ripstop weave. Thick reinforcement threads are woven into the fabric at regular intervals in a grid pattern known as ripstop.
- Two waist slit pockets
- Stretch
- Soft spacer mesh — Mesh lining for comfort and fit.
- Soft spacer mesh protector pockets — Mesh lining to keep the protective elements in position.
- Ready for Avertum Tech-Air® airbag system - ONE SIZE UP — You can wear our REV’IT! Avertum Tech-Air® airbag (or a Tech5 airbag) under this garment, provided you buy the garment one size larger than usual. If you want to wear a garment marked “Ready for Avertum Tech-Air® airbag system”, you need to make sure it can accommodate the expansion of the airbag, so we recommend the following fit check: 1. Measure your chest circumference and divide the result by two; 2. Measure the garment laid flat across the chest line; 3. If the difference between point 1 and point 2 is 12 cm or more, the garment is suitable for wearing over the airbag. Note: Keep in mind that the garment must be bought in the correct size so that the shoulder and elbow protectors fit properly and protect you as well as possible in a crash. To make room for the airbag to expand, you can remove any separate layers (thermal and waterproof liners) that could restrict the expansion of the airbag in a crash. When wearing the airbag, remove any back protector from the garment (a back protector is included in the airbag) and set all adjustment straps on the body to their widest position.
- Sustainable DWR C0 water-repellent finish
- Vegan
- Lining with recycled polyester
- Inner chest pocket
- CFZ VCS|Aquadefence — The CFZ VCS|Aquadefence system (Central Front Zipper) integrates direct ventilation, letting you open the front zip to improve airflow while keeping the garment waterproof and avoiding excess bulk.
Composition: Lining: 62% Polyester, 18% Polyamide 6, 16% Polyester (recycled), 4% Elastane; Membrane: 100% Thermoplastic Polyurethane; Outer shell: 95% Polyamide 6, 5% Elastane
Shipping rates
At Aventurx we work to deliver your products as quickly as possible and with the utmost care. Below you’ll find all the details on our rates and delivery options. We ship to Italy and Europe.
Please note: order processing and/or shipping may be slightly delayed during holidays.
Important information about products labelled “Online only”
Products marked “Online only” are shipped directly from the supplier. As a result, processing and delivery times may extend up to 2 weeks or more.
Shipping in Italy
Standard shipping rate: €4.99 for all orders with a total value below €50.00. Orders with a total value above €50.00 get free shipping.
Shipping to European Union (EU) member states
Standard shipping rate: €9.99 for all orders.
Shipping to European countries (non-EU)
Standard shipping rate: €19.99 for all orders
Returns and refunds
We want you to be completely satisfied with your purchase from Aventurx. If for any reason you change your mind, you have 30 days from delivery to request a return.
How the refund works
To cover handling costs, a fixed fee of €5.00 applies and is deducted directly from your refund total.
Step by step
- Request: log in to your Account and select the order you want to return.
- Authorisation: once you’ve sent the request, you’ll receive an email with instructions and the label to put on the parcel.
- Shipping: drop the parcel off at the pick-up point nearest to you (e.g. BRT, post office, InPost).
Quality check and return acceptance
The product must reach us in the same condition in which you received it.
- Inspection: once the parcel arrives at our warehouse, our staff will carry out a technical check.
- Condition: the product must be intact, unused and complete with its original packaging. If it shows signs of wear or damage, or can no longer be resold, the return will unfortunately be refused.
- Negative outcome: if the return is refused, we’ll let you know immediately. The product will remain available for collection (at your expense) at our warehouse, or we can send it back to you once the shipping costs have been paid.
Refund times
The refund will be made to your original payment method (or, if you prefer, as a store voucher valid for 365 days) only after the quality check has been passed.





































































































